When mentioning to the record players or turntable, we will often think of older people. Nonetheless, this thinking is now obsolete. At present, those who enjoy the original sound of vinyl or records are not only older people but also the youth. It can say that records are an incredible comeback with a lot of fans as well as collectors of the related things to vintage. So, what would you do in case you find a turntable of your grandparents in the basement of your house? And it is not operating anymore, is it? Like that, an issue is due to its faulty belt. Nevertheless, in what way can you recognize the wrong and the way to fix it?
How to Replace Your Record Player Belt That Those Who Love Vinyl Should Know
The record player belt
The majority of the record players utilizes the turntable belt for the combination of the motor and the turntable. It is known that the belts are often made components the correct way and suitably designed a concrete model. However, your record player has stopped manufacturing. Don’t need to be worried! It will not have an issue that you must throw out your turntable because there do not have the replacement parts, which are unavailable on the market. At the moment, both the belt versions and universal belts can be found for any record players.
How does a record player belt operate?
The essential function of the record player belt is the torque transmission. Thanks to these belts, the turntable and the motor are connected to a whole record player. At the same time, the vibrations are caused by the motor, which will not be transmitted to your turntable. Time to time, the belts will gradually wear down. It means that you need to exchange them frequently – the average time is from 5 to 10 years.
Which ones make the belt damage?
It is capable of the record player, which loses the tension by time. It is possible for them that become brittle, so it could not continue operating anymore. Beyond that, the worst case may be due to the rubber in a turntable belt, which is broken down after using a couple of years. The identification sign small-rubber pieces that you can see on your record player.
*Note: Let’s remember that the rubber cannot suffer the heat. If it constantly suffers the heating at 950F, your belt can be damaged only in a short period of time. For a reason, it is necessary for storing your turntable in a cool environment or the proper temperature. In that way, the belts will be able to be used for a long time.
The diameter of the belt – the way to measure
When it comes to this issue, it depends on your own record player. It is the capacity of some models of the manufacturers, which have stopped in business. So, what would you have to do once you cannot replace your damaged belt from these manufacturers?
If your turntable belt has the same case, a simple way is to use a ruler to measure the length that you need. In case you’d like to purchase a new one, you ought to find a belt the closest to your belt. If impossible, you can also look for one small a little bit because the belt is capable of stretching time by time; even, it can be going to be longer than the original size. It is necessary for putting your belt under the tension in order to make sure your record player, which always work the perfect way as possible. There is a reason why a smaller diameter of the belt is fit.
Another bad case is your belt, which is broken down. Of course, to measure its initial diameter, it cannot perform. Don’t worry! You may still utilize the ruler so as to figure your belt size. Simply, you only need a piece of paper and a pen. It begins measuring your record player diameter and note the size. Hence, it continues writing down the size of the motor shaft’s the diameter. The last one, you will measure the distance from the turntable to the motor, by the way, the ruler is put in the middle position of your record player to the motor shaft (it is also the middle position) that is a straight line. Let’s note this measured result.
For the time being, after placing the ruler aside, you will begin finding the belt’s diameter based on these measurements that you have measured. To get the suitable result, you ought to subtract 5%-7% in order to make sure that the chosen new belt will be smaller. Like that, around the turntable and the motor, the belt will be able to be tension completely. To make sure anymore, you can measure the width of the belt. In additional to that, you must also measure the narrow edge of your turntable. There is the position of the belt. In general, the number will be range from 3 to 5 millimeters. By utilizing these measured results, buying or ordering a new belt will not be too difficult to replace.
How to replace the belt on your record player like a boss
Even though you turned on your turntable, it does still not spin. It is certain that have a problem with the turntable belt. As above mentioned, the belts help to connect the turntable to the motor, so your record player may spin with the constant speed. Although it seldom snaps, the belt can still slip off or wear down. Fortunately, it is not difficult to replace. Only with the effort tools, you may easily replace it at home.
Here are the steps in replacing the record player replace:
Step #1: Let’s check before deciding to replace a new belt.
The largest identification sign for replacing a new belt is that your turntable does not spin whether it is turned on. For the reason, there are plenty of indicators such as
- The sound of your turntable is deeper or lower pitched.
- It recognizes the speed that has changed, especially, when the record is hit by the needle.
- It has utilized a strobe disc and downloaded. Let’s check out the running speed of your turntable in order to ensure that it still works efficiently.
Step #2: It buys the suitable belt for your record player.
Obviously, the belts are not similar – the length, thickness, and width. Consequently, it creates the difference of the turntables. If possible, you should look for the similar record player belt, by the way, it finds online for the belt to replace. On the market, there is a wide range of webs, which provide the concrete belts – Turntable Belts or Needle Doctors, for example. Then, you only need to click your turntable type. In case you do not find an indefectible replacement, it forces you to:
- Measure the length of your old belt and subtract 5 – 10 millimeters for the stretched amount.
- Measure the width of the belt.
- Pull off the platter so as to measure the hub circumference (it opens cylinder on the underside and wraps the belt around it) with a ruler, in case you cannot measure the old belt. Don’t forget to subtract 5 – 10 millimeters. Inevitably, there is the length, which is suggested for a new belt yours.
Step #3: The power of your record player is disconnected.
Like that, any electrical shocks can be prevented, although this case rarely occurs. Nonetheless, to make sure the safety for your turntable, this one is necessary.
Step #4: It removes the plastic mat.
Exactly, the plastic mat is the surface that you use to put the vinyl onto. It will easily remove out of the central shaft. Simply, you just pull and place it aside.
Step #5: It removes the platter.
When looking underneath the mat, you will see a plastic circle or a metal – the platter. It frequently has two access ports and small holes, which allow you to see the motor via the platter. By many different ways, you can attach it to the central shaft. However, removing it is quite easy:
- If there has a small clip with the C-shape one that is attached to the central shaft. Let’s utilize a screwdriver (flat-head) in order to pull it up. Later, you should save it.
- In case there does not have a clip, but it is resisted removal by the platter, it is capable of press-fit. To pry it up, you can utilize a hammer and gentle tap on the central shaft. By this way, the platter can easily be removed.
Step #6: On the flat surface, it turns the platter up-side-down.
You can make use of this opportunity to remove dust or dirt on the motor after a long time without cleaning. You only need a paper towel and a little alcohol in order to clean the parts out of dust.
Step #7: It stretches the belt over the central hub of the platter.
It must snugly fit onto the circle. To get that, you need to pay attention a couple of points:
- It ensures the straight belt.
- It places it in the middle of the circle.
- It must ensure that it is not kinked or twisted.
- On the belt, it has a ribbon when you should line it up in the platter with one of the accessed holes. In that way, you will be easy to pull the turntable belt onto the motor.
Step #8: The belt will be stretched onto the small post or peg in case the platter does not have any holes for accessing.
You shall have to look for a small post or peg near the platter’s the edge if your platter is a solid one. The belt on this peg or post needs to be stretched in order that the total of the belt becomes a triangle with a round bottom. On the contrary, you can ignore this step if the access holes have in the platter.
Step #9: The platter is flipped over and placed back on the record player.
The platter is returned to the record player, but the C-clip is replaced yet.
Step #10: The platter is turned in order that the motor is connected to the access holes.
It is come up from the record player’s the corner. The motor – a small-metal shaft is hooked by the belt. The turntable will be turning when the motor is spinning. Thanks to one of the access holes is lined up on your platter, the motor might be touched or reached in.
In case the platter is not any access holes, you can align the post on the platter bottom with the spindle of the motor. Let’s put your platter down! Hence, you begin spinning it two-round clockwise and counterclockwise so as to hook up your belt to the motor.
Step #11: It grabs your belt; then, around the motor, you will hook it up.
The belt is going to be pulled via the access hole and stretched over the spindle of the motor. On the top, it ought to have a small cap to prevent the belt that is being slipped off. Therefore, it makes sure that the belt is pulled over this. Like that, it will always be held on the motor’s the body.
Step #12: It checks the belt by turning your record player in two directions.
You will recognize a light resistance or consistent. It should know that the platter will not turn forever, but stopping or jerking has never been. In case you see this signal, let’s check out the belt immediately. If it is smooth, you need to replace the mat, C-clip and plug in playing. It turns on and observe it spins.
Step #13: It overcomes all issues by repeating the process.
The belt is not connected to the motor exactly – this is the most popular problem. Let’s ensure that the belt is beneath the little cap on the top. Beyond that, the belt can also be too loose or tight. If the platter are not able to be turned by hand, it means that it is too tight. Conversely, the belt is too loose.
Last But Not Least
You follow the above guide and succeed in replacing the belt on the record player, don’t you? Well, let’s spend some minutes to complete the remaining job. If you make your turntable have a little dirt and dust during the process of replacing the belt, you only need to use a moist cloth to remove it easily. To consider the replacement of your belt, you may try playing it immediately. Now, you can enjoy the unique sound of your record player.